Medical equipment, tools, gasbags, small bore tubing, fluid containment bags, self-supporting structures for water and blood purification and more. Our ETFE Tubing constructed with Tefzel™ ETFE resin is chemically inert and delivers excellent solvent resistance. It offers a structure that is more rigid than PTFE, FEP, and PFA making this tubing better able to resist inner diameter collapse. Etching– Many fluoropolymers, including ETFE, have very low coefficients of friction and are very disinclined to react with other materials, thus they do not readily bond to other substances. To overcome this drawback, we can chemically etch the surface of ETFE tubing so that it can be bonded to another material.
O-rings, gaskets valve stem seals, shaft seals, lining of fuel hoses, power steering and transmission. YOFC’s 900 micron ETFE tubing can be employed as buffering material and provide additional protection for use with 250μm fibre. It strengthens the protection of forms against unwanted hacker attacks. We treat your personal data as confidential information and in accordance with the statutory data protection regulations and this privacy policy. As a private customer, you have the right to withdraw from your purchase within a fourteen day period.
Sub-Lite-Wall® – This ETFE ultra-thin walled heat shrink has been developed specially to minimize thickness where thickness is of critical importance such as in catheter design and fiber optics coatings. ETFE’s Sub-Lite-Wall® heat shrink is sterilizable for biomedical applications to encapsulate probes, meters, and other tools. Our ETFE heat shrink has a low heat shrink recovery temperature compared to many other polymer heat shrinks allowing it to be used in many more applications. Heat Shrink– ETFE heat shrink has broad applications ranging from covering and protecting critical components in harsh working environments to wire splicing. ETFE’s lower recovery temperature of 360 ºF (185 ºC) to 420 ºF (215 ºC), its temperature tolerance, and its chemical resistance make this heat shrink a primary option for component and wire encapsulation.
Compared to PTFE, ETFE is slightly harder and has a reduced mật độ trùng lặp từ khóa. The tubing can be used as part in wiring harness, as hose liner or for HPLC Applications. Chukoh Chemical Industries has been certified under ISO 9001 and 14001, which are international standards for quality and environmental management.
Many companies specifically invest in these kinds of tubes due to their high level of tolerance. You can often locate them as industrial harnesses and in different kinds of projects for their chemically resistant properties. ETFE tubing has some outstanding properties which makes it particularly suitable for HPLC since it has a higher burst pressure when compared to PTFE. It is important to note that when using ETFE with organic solvents it may swell and will reduce the max. It is the ideal polymer for applications with chloride salts, which typically corrode stainless steel.
With the help of our database, you will be able to identify the most suitable polymer for your application with ease. Since 1970, Holscot have become known as problem-solvers, adapting fluoropolymers across all industries & pioneering many new applications. Because of the range of customers we work with and the large numbers of different applications for our products, the information on this trang web is only a starting point. FlareGrip® II Fittings are available in a full line of industry standard flare fittings in straight, elbow, and Tee configurations, and offer the same footprint as industry standard fine thread flare fittings.
It is also an excellent electrical insulator with superior impact strength. Our NanoTight Kits are carefully manufactured using Dupont® FEP fluoropolymer – a highly inert, melt-processed polymer that serves as an excellent alternative to PTFE. A wide assortment of sleeves is available, ensuring the availability of a NanoTight sleeve for most applications. Our kit is designed to increase flexibility and convenience at a lower per-piece price than if the components were purchased separately. Zhaoqing High-tech Zone Dong Shi Machinery Technology Co., Ltd. founded in 2012, is a leading manufacturer ofPTFE convoluted tube, PTFE braided hose, and assembly. Our company covers an area of square meters and has 6 PTFE production lines,4 sets of braiding machine,1set of cutting and crimping machines, a full set of testing equipment, etc.